Wood Costs Declined for Many North American Pulp Mills in First Half 2019 with the Exception of US South
Lower prices for pulp, improved weather for logging and healthy production levels at many sawmills in the US were all factors which resulted in lower wood fiber costs in most regions throughout he US in the 2Q/19.
With sawmills in the US Northwest running at only slightly reduced production levels in the 2Q/19 due to small adjustments of US lumber prices, residual chip supply remained stable.
Sept. 5, 2019 - Wood fiber costs fell in most regions of North America during the first six months of 2019, with the biggest declines in Western Canada and the US Northwest, according to the Wood Resource Quarterly.. Prices for pulplogs and wood chips in the US South bucked the trend, with softwood fiber moving up to its highest levels in three years and hardwood fiber prices hitting an all-time-high.
Wet weather conditions in the US South continued to restrain harvesting in the 2Q/19. However, pulp mill maintenance outages and falling pulp and paper product prices led to softening demand for wood fiber this quarter. The result was an easing in softwood pulplog prices from the 1Q/19. Even though hardwood pulplog pricing remained flat, the region was slowly reducing its reliance on long-distance haul supply sources, as well as finishing harvesting operations in timber stands that were purchased when rates were higher than in the 2Q/19.
With sawmills in the US Northwest running at only slightly reduced production levels in the 2Q/19 due to small adjustments of US lumber prices, residual chip supply remained stable. Residual chip prices dropped mainly as fiber demand diminished due to seasonal pulp mill maintenance outages. The reduced fiber consumption resulted in most pulp mills being able to build their fiber inventories going into the second half of the year. According to the North American Wood Fiber Review, most sub-regions of the Northwest saw pulplog and residue prices decline in the 2Q/19 to reach their lowest levels since early 2018.
US Lake States
As winter weather of snow and freezing rain continued longer into the 2Q/19 than usual, more pressure was placed on fiber buyers and their inventories. Some pulp mills reported having adequate volumes, while a few others struggled with insufficient wood supply, especially of hardwood fiber. The result was that the price for hardwood pulplogs increased nearly 4% between the 2Q/18 and the 2Q/19, reaching its highest price seen since early 2017. The pricing for softwood pulplogs remained unchanged from the 1Q/19.
As is customary in the US Northeast, the arrival of spring meant that logging contractors had to contend with muddy harvesting conditions, which prevented much fiber moving from the woods to the logging yards. Softwood fiber prices remained stable during the 2Q/19. In contrast, hardwood pulplogs edged upward to levels not seen since the 2Q/16. This price increase was due to the higher cost of reloading the pulplogs stored at the satellite yards.
In British Columbia, the average price for pulplogs fell slightly to C$51/m3 in the 2Q/19. In the Interior of the province, pulplog prices were steady because pulp mills made a push early in the year to build up their inventories before the spring breakup. Production also slowed at several pulp mills due to lower NBSK prices. In the Southwest Coastal Region, there were no significant supply or price fluctuations.
Of the three regions in Western Canada, residual chip prices in the Interior of BC saw the steepest decline in the 2Q/19 at six percent q-o-q as a result of the slipping NBSK pulp prices (see more in the latest NAWFR). Wood chip prices in Coastal BC fell just over two percent from the 1Q/19 and were down four percent in Alberta.
In Eastern Ontario and Quebec, weather-dependent harvesting challenges during the winter months resulted in mediocre hardwood log inventory levels in the 2Q/19. This caused the prices for hardwood pulplogs to edge upward to levels last seen in early 2016. There was no movement in the price for residual chips in the 2Q/19. However, the opening of two new pellet mills during the second half of the year is expected to upset the current supply and demand balance and could therefore change chip prices late in 2019 or early 2020.
In the Maritime Provinces, mill and pulp mill inventories remained stable during the spring thaw. Sawmills were not running hard, so the demand for sawlogs was tepid. The price for softwood pulplogs remained flat in the 2Q/19, while the price for hardwood pulplogs rose by two dollars/odmt. This price increase was primarily due to higher handling costs of moving the pulplogs from auxiliary wood yards, as well as in some cases temporary bonuses.
Wood Resource Quarterly is published by Wood Resources International, an internationally recognized forest industry-consulting firm. For further information visit: www.woodprices.com.
SOURCE: Wood Resources International LLC